Stans NoTubes Flow Cb7 Carbon

Sold out

Stans NoTubes Flow Cb7 Carbon

Sold out

Details are the difference between a good wheelset and a great wheelset. The Flow CB7 carbon wheelset is lighter and stronger than most of its competitors, but it’s the details that make it a great overall wheelset. The Flow CB7 uses an asymmetric rim design to create a stronger wheel. Asymmetric rims drilled with offset spoke holes that aren’t in the center of the rim increase strength by improving the bracing angle of the spokes, creating a more stable, wider base that better supports your rim. But bringing our legendary Bead Socket Technology to an asymmetrical rim presented a whole new level of challenges. Asymmetric rims have traditionally been unable to live up to Stan’s high standards for tire installation, easy inflation, tire removal, and a reliable airtight seal. For years we didn’t think it was even possible to build an asymmetric rim that could inflate easily and retain consistent pressure under the most aggressive riding. When our friends at Ibis approached us looking for a way to bring our best-in-class tubeless rim design to their highly successful asymmetric rim shape, we knew that together we could create a better asymmetric rim. Why is making a great asymmetric tubeless rim so tough? One reason is that tire beads don’t pop into place simultaneously on an asymmetrical rim. Forces while riding are also very different from one side to the next when cornering. Perfecting inflation, tire retention and ride quality required a whole new approach to rim design. Together with the carbon specialists at Ibis, we were able to perfect our tubeless design for asymmetric rims. Not only do Stan’s approved Asymmetrical BST rims inflate easier and hold air more effectively than any other asymmetric design, they also allow for the lowest possible sidewalls. Lower sidewalls mean much lighter weight, better sealing and retention, and a faster, more forgiving ride. Like all Stan’s carbon rims, the shape and layup of the Flow CB7's is based on our radial impact absorbing carbon technology, RiACT. Unlike lesser carbon rims that ride stiff and transfer impacts and vibration to the suspension and rider, the Flow CB7 is able to deflect radially to help prevent pinch flats, roll faster and feel better. The RiACT rim shape, combined with the added bracing angle strength of the Flow CB7’s asymmetrical drilling, also maintains excellent lateral stiffness and strength while absorbing those radial impacts. The Flow CB7 is available with our own Neo hubs featuring a Durasync 6-pawl freehub with fast 10-degree engagement, and triple freehub bearings to better distribute axle load. Neo hubs shells are 100% CNC machined for precision and roll on low-friction centerless ground axles for long life and reliable performance. Combined with mechanically locking Secure Lock nipples, Sapim spokes allow for a light but very strong wheel. Like all Stan’s wheels the Flow CB7 relies on conventional j-bend spokes, which are easy to replace any almost any shop. Flow CB7 wheelsets are available to fit every common axle style. Register your wheels with us and your Flow CB7 wheelset is backed up by our 7-year warranty and lifetime crash replacement offer. The Flow CB7 brings Stan’s patented BST tubeless system to wider carbon rims to create a new classic, and one of the best all-around trail rims you can buy. The details all add up to a light, strong wheelset that’s easier to own and performs better on the trail. The Flow CB7 brings Stan’s legendary tubeless performance and great quality to a wider and stronger asymmetric carbon rim. What’s Included: Flow CB7 wheels include pre-installed tape for tubeless use and presta valves. Rim Internal Width:29.0mm Rim External Width: 35.0mm Rim Depth:18.3mm Wheelset Weight:1,674g (27.5”) / 1,761g (29”) Front Wheel Weight:776g (27.5”) / 820g (29”) Rear Wheel Weight:898g (27.5”) / 941g (29”) Hub:Neo with Durasync Hole Count:32-hole, 32-hole Tape:30mm Max Spoke Tension:105kgf (1030N) Max Pressure with 2.40" Tire:37psi Max Pressure with 2.80" Tire:26psi Valve:35mm Presta Max Rider Weight:250lbs (113 kilo)

Variants:
Variant:
  • Description

Details are the difference between a good wheelset and a great wheelset. The Flow CB7 carbon wheelset is lighter and stronger than most of its competitors, but it’s the details that make it a great overall wheelset. The Flow CB7 uses an asymmetric rim design to create a stronger wheel. Asymmetric rims drilled with offset spoke holes that aren’t in the center of the rim increase strength by improving the bracing angle of the spokes, creating a more stable, wider base that better supports your rim. But bringing our legendary Bead Socket Technology to an asymmetrical rim presented a whole new level of challenges. Asymmetric rims have traditionally been unable to live up to Stan’s high standards for tire installation, easy inflation, tire removal, and a reliable airtight seal. For years we didn’t think it was even possible to build an asymmetric rim that could inflate easily and retain consistent pressure under the most aggressive riding. When our friends at Ibis approached us looking for a way to bring our best-in-class tubeless rim design to their highly successful asymmetric rim shape, we knew that together we could create a better asymmetric rim. Why is making a great asymmetric tubeless rim so tough? One reason is that tire beads don’t pop into place simultaneously on an asymmetrical rim. Forces while riding are also very different from one side to the next when cornering. Perfecting inflation, tire retention and ride quality required a whole new approach to rim design. Together with the carbon specialists at Ibis, we were able to perfect our tubeless design for asymmetric rims. Not only do Stan’s approved Asymmetrical BST rims inflate easier and hold air more effectively than any other asymmetric design, they also allow for the lowest possible sidewalls. Lower sidewalls mean much lighter weight, better sealing and retention, and a faster, more forgiving ride. Like all Stan’s carbon rims, the shape and layup of the Flow CB7's is based on our radial impact absorbing carbon technology, RiACT. Unlike lesser carbon rims that ride stiff and transfer impacts and vibration to the suspension and rider, the Flow CB7 is able to deflect radially to help prevent pinch flats, roll faster and feel better. The RiACT rim shape, combined with the added bracing angle strength of the Flow CB7’s asymmetrical drilling, also maintains excellent lateral stiffness and strength while absorbing those radial impacts. The Flow CB7 is available with our own Neo hubs featuring a Durasync 6-pawl freehub with fast 10-degree engagement, and triple freehub bearings to better distribute axle load. Neo hubs shells are 100% CNC machined for precision and roll on low-friction centerless ground axles for long life and reliable performance. Combined with mechanically locking Secure Lock nipples, Sapim spokes allow for a light but very strong wheel. Like all Stan’s wheels the Flow CB7 relies on conventional j-bend spokes, which are easy to replace any almost any shop. Flow CB7 wheelsets are available to fit every common axle style. Register your wheels with us and your Flow CB7 wheelset is backed up by our 7-year warranty and lifetime crash replacement offer. The Flow CB7 brings Stan’s patented BST tubeless system to wider carbon rims to create a new classic, and one of the best all-around trail rims you can buy. The details all add up to a light, strong wheelset that’s easier to own and performs better on the trail. The Flow CB7 brings Stan’s legendary tubeless performance and great quality to a wider and stronger asymmetric carbon rim. What’s Included: Flow CB7 wheels include pre-installed tape for tubeless use and presta valves. Rim Internal Width:29.0mm Rim External Width: 35.0mm Rim Depth:18.3mm Wheelset Weight:1,674g (27.5”) / 1,761g (29”) Front Wheel Weight:776g (27.5”) / 820g (29”) Rear Wheel Weight:898g (27.5”) / 941g (29”) Hub:Neo with Durasync Hole Count:32-hole, 32-hole Tape:30mm Max Spoke Tension:105kgf (1030N) Max Pressure with 2.40" Tire:37psi Max Pressure with 2.80" Tire:26psi Valve:35mm Presta Max Rider Weight:250lbs (113 kilo)