ENVE SES AR One Piece Bar In Route

Introduced on the US-Made ENVE Custom Road bike and made available to select custom frame builders around the globe, the SES AR (All-Road) One Piece bar/stem combo is now being offered for the first time on the aftermarket. As the flagship handlebar in ENVE's line-up, the SES AR One-Piece employs the IN-Route System for its internal routing. The SES AR One-Piece is compatible with the ENVE Melee, MOG, and a variety of custom-built frames featuring ENVE's IN-Route System. Due to the handmade nature of this product, quantities are limited and may be subject to lead times. BAR GEOMETRY REACH: 76mm DROP: 127mm RISE: -7° COMPOUND FLARE: 18° (5cm between hoods and drops) WEIGHT: 330-360 grams (dependent on width and stem length) SYSTEM COMPATIBILITY This bar will seamlessly integrate with ENVE's frame models and some custom built frames whose builders have chosen ENVE's IN-Route System as their preferred method for hidden routing. The IN-Route System runs the wires/cables and brake hoses through the bar/stem and down the front of the steerer-tube, and then into the fork and frame. If your non-ENVE, non-custom bike is routed in a similar manner, you may be able to utilize the SES AR One-Piece. Modifications to the customer's headset components may be required and will likely void the warranty. WHAT'S IN THE BOX SES AR One-Piece Bar Hardware kit Shimano Junction Box Carrier Integrated Bar-End Plugs K-EDGE Computer Mount (Combo/Accessory Mount sold separately) Spacers (2 x 5mm, 3 x 10mm) + 1 x 10mm External Bypass Spacer